Non Contact Ultrasonic Water Tank Level Gauge Liquid Level Gauge 4
20mA For Fuel Tank
Description Non Contact Ultrasonic Water Tank Level Gauge Liquid
Level Gauge 4 20mA For Fuel Tank
Ultrasonic level gauge is a monitoring instrument for measuring
liquid height, tank height and material position. The instrument
itself can use two-wire, three-wire or four-wire technology.
Two-wire system: power supply and signal output are shared;
three-wire system: power supply circuit and signal output circuit
are independent. When DC 24v power supply is used, a 3-core system
can be used The cable, the negative end of the power supply and the
negative end of the signal output share one core wire; the
four-wire system is: when the AC 220v power supply is used, or when
the DC 24v power supply is used, and the power supply circuit and
the signal output circuit are required to be completely isolated, a
single wire should be used. A 4-conductor cable. DC or AC power
supply, with 4~20mADC, high and low switch output.
Applications Non Contact Ultrasonic Water Tank Level Gauge Liquid Level Gauge 4
20mA For Fuel Tank
Proximity Detection
Robot range finder
Sedimentation pool
Coal washing process
Obstacle detection, collision avoidance
General-purpose distance detection
Wastewater treatment
Features Non Contact Ultrasonic Water Tank Level Gauge Liquid Level Gauge 4
20mA For Fuel Tank
1.It has strong anti-interference. The upper and lower limit nodes
and online output adjustment can be set arbitrarily, and with
on-site display, analog quantity, switch quantity and RS485 output
can be selected, and it is convenient to interface with related
facilities.
2.With polypropylene waterproof shell. The shell is small and quite
strong, and has excellent chemical resistance. For inorganic
compounds, no matter acid, alkali or salt solution, except for
strong oxidizing materials, it has almost no destructive effect on
it, and it is resistant to almost all solvents at room temperature.
It is insoluble and can be used in general alkanes, hydrocarbons,
alcohols, phenols, aldehydes, ketones and other media.
3.Nontoxic. It can be used for the installation of pharmaceutical
and food industry equipment, and the maintenance is extremely
convenient
Specification Non Contact Ultrasonic Water Tank Level Gauge Liquid Level Gauge 4
20mA For Fuel Tank
| Full scale | 5m ,8m |
| Unusable area | ≤0.4 |
| Max measure error | 0.25%×full scale |
| Power | 12-24VDC |
| Power consumption | <1.5W |
| Output signal | 4~20mA (other output is optional) |
| Max load impedance | 700Ω |
| Display panel | OLED |
| Material | ABS |
| Fix model | M60X2 or ￠61MM |
| Dimension | Φ92mm×198mm×M60 |
| Protection degree | IP65 |
| Humidity | 0 to 95% |
| Ambient temperature | -10℃~60℃ |
| Ambient pressure | normal condition |
