Description of Tuning Fork Density Meter 4-20mA 4 Wire Piezoelectric Tuning Fork Density Meter
Tuning fork density meter principle description:
Fork sensors ---------- one pair fork ceramic chip
A piezoelectric ceramic is responsible for collecting vibration
The fork is always vibrate in the resonant frequency of vibration
Fork in different densities ,the resonance frequencies was
different,.according to the relationship between the different
vibration and density to calculate the density
The resonance frequency of the tuning fork is between 1600-2400
The higher the frequency the smaller density.
Specification of 4-20mA 4 Wire Piezoelectric Tuning Fork Density
Meter
Density range
| 0-3 g / CM3 (3 /2.5/ 2 /1.5/ 1) |
Output
| 4-20 mA 4-wire ( 2-wire system can not be used) |
Accuracy
| 0.001 g / cc, with a resolution of 0.0001 g / cc |
Insertion depth
| flange distance to the end of the fork, minimum 125 mm, up to 2
meters |
| Display | Up density value, the density value can be switched to kg / cubic
meter or g / cc by unit keys. Down display a temperature value
(measured medium temperature ) temperature is original PT1000 |
Accessory
| temperature of 4-20 mA output signal |
The internal circuit board with automatic filtering function, other
vibrations like pipe vibrations can eliminate away from the side of
circuit and software,which ensure accuracy.
|
Tuning fork density meter strengths:
1. Application for high precision density measuring, mainly used in
power plant.
2. Can not be affected by temperature, pressure and flow rate,
there are few factor that can affecting measuring accuracy.
Detailed imange of 4-20mA 4 Wire Piezoelectric Tuning Fork Density
Meter
Features of 4-20mA 4 Wire Piezoelectric Tuning Fork Density Meter
1. Adopt Germany piezoelectric ceramic chip, with gold plated
process to increase the oxidation resistance of ceramic chips, also
can longer service life of density meter.
2. Fork vibration original chip adopt Japanese made high
performance original chips, Built-in 24 AD converter, frequency
identifying accuracy to be 0.01HZ, to warranty 3.the sensitivity
and precision of the meter.3.Fork density calibration adopts
national density standard solution, to ensure the source and
accurate of density.
3. The current circuit is independent of fork vibration circuit,
there is isolating anti-interference inner, reducing the influence
to instrument from disturb.
. There is set density three point quick calibration, range adjust,
current calibration etc function, to meet on-site working demands.
Application of 4-20mA 4 Wire Piezoelectric Tuning Fork Density
Meter
Used in the petrochemical industry, wine industry, food industry,
pharmaceutical industry and mineral processing (such as clay,
carbonate, silicate, etc.), specifically for interfacial detection
in multi-product pipelines in the above industries, mixing density
Detection, reactor end monitoring, analyzer interface detection.
Slection guide of 4-20mA 4 Wire Piezoelectric Tuning Fork Density
Meter
1. What's your medium?
2. What's the medium temeprature?
3. What's mesurement range do you need?
